Link'i e-posta ile paylaş
Gerekli tüm alanlar doldurulmadı
Bürkert - Yakınınızda
Ofis /1
  • Ana Ofis
  • Merkez
  • Systemhaus
  • Distribütör
  • Ofis
  • Üretim Merkezi
  • Lojistik merkez
bürkert
 

    Tip ME44 - I/O module, IP 20

    Yazdır
    Produkt-Foto Typ ME44

    Ürün görseli dizayn özelliklerine göre farklılık gösterebilmektedir.

    • Produkt-Foto Typ ME44
    • Produkt-Foto Typ ME44

    Tip Tanımı

    Bürkert I/O modules (In/Out) Type ME44 for extending the fieldbus gateway Type ME43 are used both to capture sensor signals and to give set-point values or switching commands. The analogue modules 4AI (4 analogue inputs) and 4AO (4 analogue outputs) read in analogue sensor signals (e.g. from pressure transmitters) or give analogue set point values (e.g. for a flow controller). The further processing of input signals, e.g. via a fieldbus to a higher field level, or the targeted output of set-point signals is configured via the fieldbus gateway Type ME43. The digital modules 8DI (8 digital inputs) and 8DO (8 digital outputs) can be used for the feedback of switches (to DI) or the output of switching signals (via DO). Once again, a configuration in Type ME43 specifies how these inputs and outputs are processed or controlled. The I/O modules of Type ME44 are plugged onto a so-called backplane, which in turn is connected to the gateway Type ME43. Up to 9 modules of Type ME44 can be connected by 3 backplanes to one gateway Type ME43. Electronic modules Type ME43 and ME44 are part of the Bürkert EDIP (Efficient Device Integration Platform) concept. They facilitate the integration of field level devices (e.g. valves or sensors) into the higher control level. The modules of Types ME43 and ME44 complement the Bürkert EDIP systems. All I/O modules of type ME44 comply with IEC 61131-2.

    • Configurable input and output modules for analogue and digital signals
    • Integrated diagnosis possibilities such as wire break, short circuit detection
    • Installation and disassembly without tools
    • Colour-coded push-in connectors to avoid wiring errors
    • Removable terminals with PUSH-IN spring connection

    Doğru ürünü seçmek için lütfen teknik dökümanda yer alan teknik bilgileri, görselleri ve notları inceleyiniz.

    İndirilebilir dokumanlar

    Teknik Broşürler

    Tanım
    Dosya büyüklüğü
    Dil / Ülke
    DTS Type ME44 data sheet | I/O-Modules, IP 20 2 MB EN / EU
    DTS Typ ME44 Datenblatt | I/O-Module, IP 20 2 MB DE / DE

    Kullanım kılavuzları

    Tanım
    Dosya büyüklüğü
    Dil / Ülke
    MAN Definition fieldbus: Communication, cyclic commands, accessto büS objects 660 kB EN / EU
    MAN Operating Instructions Type ME44 |I/O module 4 MB EN / EU
    MAN Quickstart Type ME44 | I/O module 4AI 4AO 8DI 8DO 1 MB EN / EU
    MAN Software manual | CANopen Network configuration 928 kB EN / EU
    MAN Software manual | Central configuration management 1 MB EN / EU
    MAN Bedienungsanleitung Typ ME44 | I/O-Modul 4 MB DE / DE
    MAN Beschreibung Feldbus: Kommunikation, zyklische Befehle ausführen, Zugriff auf büS-Objekte 669 kB DE / DE
    MAN Description Bus de terrain : communication, commandes cycliques, d'accéder objets büS 671 kB FR / FR
    MAN Manuel d'utilisation Type ME44 | Module E/S 4 MB FR / FR
    MAN Manuel du logiciel | Gestion centrale de la configuration 1 MB FR / FR
    MAN Quickstart Typ ME44 | I/O Modul 4AI 4AO 8DI 8DO 983 kB DE / DE
    MAN Quickstart Type ME44 | ModuleE/S 4AI 4AO 8DI 8DO 1 MB FR / FR
    MAN Software-Anleitung | CANopen Netzwerkkonfiguration 1 MB DE / DE
    MAN Software-Anleitung | ZentraleKonfigurationsverwaltung 1 MB DE / DE

    Yazılım

    Tanım
    Dosya büyüklüğü
    Dil / Ülke
    SOW Buerkert Communicator 5.0.14 527 MB ML
    SOW Initiation Files EDS A.05 11 kB ML

    AB Bildirimi

    Tanım
    Dosya büyüklüğü
    Dil / Ülke
    ABD EU-DoC|EU Declaration 31 kB EN,FR,DE

    Karşılaştırma listem