Link'i e-posta ile paylaş
Gerekli tüm alanlar doldurulmadı
e-posta gönder
Bürkert - Yakınınızda
Ofis /1
  • Ana Ofis
  • Merkez
  • Systemhaus
  • Distribütör
  • Ofis
  • Üretim Merkezi
  • Lojistik merkez
bürkert
 

    Tip 8232 - Chlorine sensor

    Produkt-Foto Typ 8232

    Ürünlerin görüntüleri gerçek görüntülerinden farklılık gösterebilir.
    Teknik Özelliklere ve Bilgi Formlarına dikkat ediniz!

    Tip Tanımı

    The 8232 from Bürkert is an electrochemical sensor designed for the measurement of the free and total chlorine concentration generated from inorganic sources (chlorine gas, sodium hypochlorite solution,...). Type 8232 is available in four variants: • The “Trace” chlorine sensor (zero-chlorine) equipped with three electrodes is suitable for the measuring of free chlorine at very low concentrations. The diaphragm of this sensor is protected against biofouling and can therefore work for up to four weeks in water without chlorine. It has a voltage output on a four-pin fixed connector. • The free chlorine sensor with three electrodes offers greatly reduced pH-dependency. This sensor has a current output on a M12 connector and is designed for applications in a swimming pool, drinking or sea water. The fluid must contain a minimum chlorine concentration (≥ 0.1 ppm). • The free chlorine sensor with two electrodes delivers a current output on a M12 connector. It is designed to be used in a swimming pool, drinking or process water. The fluid to be measured must not contain any cleaning agents (e.g. surfactants) or abrasive particles and its pH value must be kept at a constant level. The fluid must contain a minimum chlorine concentration (≥ 0.1 ppm). • The total chlorine sensor with three electrodes offers greatly reduced pH-dependency. This sensor delivers a current output on a M12 connector and is designed for applications in a swimming pool, drinking or sea water, brine. It measures total chlorine = free chlorine + bound chlorine.

    • Free chlorine sensor “Trace” with three electrodes for measuring at low concentrations
    • Free chlorine sensor with three electrodes and greatly reduced pH dependency
    • Free chlorine sensor with two electrodes for standard applications at a constant pH value
    • Total chlorine sensor with 3 electrodes and greatly reduced pH dependency

    Doğru ürünü seçmek için lütfen teknik dökümanda yer alan teknik bilgileri, görselleri ve notları inceleyiniz.

    İndirilebilir dokumanlar

    Teknik Broşürler

    Tanım
    Dosya büyüklüğü
    Dil / Ülke
    DTS Type 8232 data sheet | chlorine sensor 1 MB EN / EU
    DTS Typ 8232 Datenblatt | Chlorsensor 1 MB DE / DE
    DTS Type 8232 fiche technique | Capteur de chlore 1 MB FR / FR

    Kullanım kılavuzları

    Tanım
    Dosya büyüklüğü
    Dil / Ülke
    MAN Operating Instructions Type 8232 | Electrochemical chlorinesensor 449 kB EN / EU
    MAN Bedienungsanleitung Typ 8232 | Elektroschemischer Chlorsensor 456 kB DE / EU
    MAN Manuel d'utilisation Type 8232 | Capteur de chlore électrochimique 459 kB FR / EU

    Bildirimi

    Tanım
    Dosya büyüklüğü
    Dil / Ülke
    ABD EU-DoC|EU Declaration 828 kB ML

    EU Material Compliance

    Tanım
    Dosya büyüklüğü
    Dil / Ülke
    ABD EU-DoC|EU Material Compliance 42 kB EN
    ABD EU-DoC|EU Material Compliance 43 kB FR
    ABD EU-DoC|EU Material Compliance 42 kB DE

    Karşılaştırma listem