Bürkert - Yakınınızda
Ofis /1
    • Ana Ofis
      Burkert Contromatic
      Akiskan Kontrol Sistemleri Ticaret A.S.
      1203/8 Sok. No2-E
      TR-Yenisehir, Izmir
      Telefon Int. +90 232 459 53 95, Nat. 0232 459 53 95
      Fax Int. +90 232 459 76 94, Nat. 0232 459 76 94
      E-posta vasbghexrl@ohexreg.pbz
  • Ana Ofis
  • Merkez
  • Systemhaus
  • Distribütör
  • Ofis
  • Üretim Merkezi
  • Lojistik merkez
bürkert
 

    Servo-assisted 2/2 way piston valve

    Tip 6407 / ID No. 322614

    Produkt-Foto Typ 6407

    Ürün görseli dizayn özelliklerine göre farklılık gösterebilmektedir.

    • Produkt-Foto Typ 6407
    • Produkt-Foto Typ 6407
    • 9000404672.jpeg

    Servo-assisted 2/2 way piston valve

    • Servo-assisted piston valve up to diameter DN25
    • Safe opening with hard-coupled piston system
    • Vibration-resistant, push-over coil
    • Explosion-proof versions
    • Energy-saving double coil technology with Kick and Drop electronics

    Doğru ürünü seçmek için lütfen teknik dökümanda yer alan teknik bilgileri, görselleri ve notları inceleyiniz.

    Ürün tanımı

    Type 6407 is a servo-assisted piston valve. The fix coupling between pilot valve and piston provides an opening of the valve without differential pressure. As a piston valve 6407 is particular applicable for media like gas and steam. As well as liquids with low temperature under 0°C.The stopper and plunger guiding tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. The coils are moulded with chemically resistant epoxy. To reduce power consumption in operation coils with "Kick and Drop" (KD) electronics (double coil technology) are available. In combination with a plug in accordance to DIN EN 175301-803 Form A, the valves satisfy protection class IP65.


    Ülke
    DE

    Teknik özellikler

    İsim
    Değer
    Birim
    Type 6407
    Operation force-controlled
    Actuator type Plunger valve
    Main valve operating principle Globe valve
    Switch function on/off
    Media separation No
    Valve function A - normally closed - inlet port 1 (P/NC)
    Fluidic port connection number 2
    Valve function number of switching positions 2
    Valve function manual actuation No
    Flow Above seat
    Nominal pressure min 0 bar
    Nominal pressure max (liquid) 10 bar
    Main valve orifice 1 (P) (mm) 25 mm
    Main valve orifice 1 (inch) 1 inch
    Kv value (water) 10 m3/h
    QNn value (gas) 10800 l/min
    Main valve wetted material Brass
    Port connection 1 type Inner thread
    Port connection 1 thread type G
    Port connection 1 thread marking 1
    Port connection 2 type Inner thread
    Port connection 2 thread type G
    Port connection 2 thread marking 1
    Valve seat material Stainless steel
    Seat seal material category Plastics
    Seat seal material PTFE (Polytetrafluorethylene)
    Sealing toward outside material Graphite
    Temperature environment max 45 °C
    Temperature medium min -40 °C
    Temperature medium max 150 °C
    Voltage / rated voltage 240 V
    Voltage / rated voltage 240 V
    Voltage tolerance negative 10 %
    Voltage tolerance positive 10 %
    AC voltage Yes
    DC voltage No
    Battery voltage No
    Rated power consumption 16 W
    inrush power consumption AC 160 V·A
    Electrical connection sort Plug pattern form A according to DIN EN 175301-803
    Electrical connection number of contacts 2 + Grounding conductor
    Cable plug in delivery not included
    Electrical connection position in direction of flow left
    Protection type (IP max. with suitable connector) 65
    Coil type placed on top
    Coil insulation material category (encasement) Plastics
    Coil insulation material (encasement) Epoxy
    Coil size 42 mm
    Coil wiring overvoltage protection without
    Coil wiring rectifier No
    Coil wiring polarity recovery diode No
    Coil special feature for high temperatures
    Thermal insulation class of the actuator H
    Nominal operation/Duty cycle 100 %
    Switch time open min 100 ms
    Switch time open max. 200 ms
    Switch time close min 300 ms
    Switch time close max. 500 ms
    Valve setting opening time No
    Valve setting closing time No
    Back-pressure-resistant version No
    Vacuum version No
    Analysis version No
    Oxygen version No
    Oil burner valve No
    Steam version Yes
    Low-noise version No
    Main valve with integrated screen No
    Installation length 115 mm
    Without mounting Yes
    Valve construction Valve complete
    Ağırlık 0,001000 kg
    Tüm tabloyu göster Tabloyu daralt

    İndirilebilir dokumanlar

    Teknik Broşürler

    Tanım
    Dosya büyüklüğü
    Dil / Ülke
    DTS Type 6407 data sheet | Servo-assisted piston valve 906,8 kB EN / EU
    DTS Typ 6407 Datenblatt | Servogesteuertes Kolbenventil 897,4 kB DE / DE

    Kullanım kılavuzları

    Tanım
    Dosya büyüklüğü
    Dil / Ülke
    MAN Operating Instructions Type 6407 | 2/2-way solenoid valve 661,3 kB EN / EU
    MAN Bedienungsanleitung Typ 6407 | 2/2-Wege-Magnetventil 663,3 kB DE / DE
    MAN Manuel d'utilisation Type 6407 | Électrovanne 2/2 voies 640,6 kB FR / FR

    AB Bildirimi

    Tanım
    Dosya büyüklüğü
    Dil / Ülke
    ABD EU-DoC|EU Declaration 2,7 MB EN,FR,DE
    Kalem
    ID No
    Tanım
    03 329381 Wearing part set DN25 PTFE/Graphit

    Karşılaştırma listem