Pnömatik bileşenler için Servo-yardımlı 3/2-yollu Solenoid Vana
Tip 6518 / ID No. 278195
Ürün tanımı
Tip 6518 bir servo-yardımlı 3/2-yollu vana ve Tip 6519 bir 5/2 veya 5/3-yollu vanadır. Bu vanalar birlikte bir üretim hattı oluşturur. Vanalar ayrı ayrı veya bloklar halinde kullanılabilir. Vanalar bir sürekli hava tüketimi olmaksızın çalışır ve çift veya tek etkili aktüatörlerin pnömatik kontrolü için kullanılır. Pilot olarak bir Tip 6014 solenoid vana kullanılır. Bu vanalarda yüksek kalitede malzemelerin kullanılması bu vanaların açık havada ve kimyasal atmosfer altında kullanılmasını mümkün kılar. Üretim hattı Ex-Onayları ve NAMUR flanş arayüzü ile birlikte üniteleri içerir. Tek durumlu C, D ve H devre fonksiyonlarına sahip vanalar SIL2 olarak IEC 61508’e göre onaylıdır.
- GTİP Numaraları
- 84812090
- Ülke
- DE
Teknik özellikler
İsim |
Değer |
Birim |
---|---|---|
Type | 6518 | |
Product sub-group | Pneumatic valves | |
Valve function | C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conectedwith exhaust port 3 (R/NO) | |
Fluidic port connection number | 3 | |
Valve function number of switching positions | 2 | |
Valve function manual actuation | Yes | |
Valve function manual actuation type | Rotary level and Key button combined | |
Valve function manual actuation material | PA (Polyamide) | |
Valve function manual actuation stop | Yes | |
Valve function manual actuation screw slot | Yes | |
Pneumatic pilot valve 1 | 6014 | |
Valve piloting type | Electric | |
Return type | Pneumatic spring + mechanical spring | |
Pilot control orifice (mm) | 1,2 | mm |
Pilot control material medium-contacting | PA (Polyamide) | |
Pilot control material environment-contacting | PA (Polyamide) | |
Pilot control seal material | FKM (Fluor rubber) | |
Main valve operating principle | Globe valve | |
Main valve orifice 1 (P) (mm) | 8 | mm |
Main valve wetted material | PA (Polyamide) | |
Main valve material environment-contacting | PA (Polyamide) | |
Main valve seal material | PUR (Polyurethane) | |
Supply connection type | Inner thread | |
Supply connection thread type | G | |
Supply connection diameter (inch) | 1/4 inch | |
Flange | FM03 | |
Working connection type | Inner thread | |
Working connection thread type | G | |
Working connection diameter (inch) | 1/4 inch | |
Working connection position | opposite of supply side | |
Working connection material | Brass | |
Coil size | 32 | mm |
Electrical power consumption min | 3 | W |
Electircal power consumption max. | 3 | W |
Coil wiring LED | No | |
Coil wiring overvoltage protection | without | |
Coil wiring rectifier | Yes | |
Coil wiring polarity protection | No | |
Coil wiring polarity recovery diode | No | |
Coil wiring polarity recovery diode redundant | No | |
Power reduction integrated | No | |
Electrical connection sort | Wire cable | |
Cable plug in delivery | not included | |
Electrical connection position | Supply side | |
Electrical connection wire length | 3.000 | mm |
Voltage / rated voltage | 24 | V |
Voltage / rated voltage | 24 | V |
Protection type (IP max. with suitable connector) | IP65 | |
Voltage frequency | 50/60 | Hz |
AC voltage | Yes | |
DC voltage | Yes | |
Battery voltage | Yes | |
Nominal pressure min | 2 | bar |
Nominal pressure max | 8 | bar |
Temperature environment min | -25 | °C |
Temperature environment max | 50 | °C |
Temperature medium min | -10 | °C |
Temperature medium max | 50 | °C |
Switch time open max. | 20 | ms |
Switch time close max. | 40 | ms |
Add-on dimension 1 | 33 | mm |
QNn value (gas) | 1.300 | l/min |
Nominal operation/Duty cycle | 100 | % |
Ağırlık | 0,570000 | kg |
Onay tipi | , | |
Sertifika tipi | , , , |