Bürkert - Yakınınızda
Ofis /1
    • Ana Ofis
      Burkert Contromatic
      Akiskan Kontrol Sistemleri Ticaret A.S.
      1203/8 Sok. No2-E
      TR-Yenisehir, Izmir
      Telefon Int. +90 232 459 53 95, Nat. 0232 459 53 95
      Fax Int. +90 232 459 76 94, Nat. 0232 459 76 94
      E-posta vasbghexrl@ohexreg.pbz
  • Ana Ofis
  • Merkez
  • Systemhaus
  • Distribütör
  • Ofis
  • Üretim Merkezi
  • Lojistik merkez
bürkert
We make ideas flow.
We make ideas flow.

    Servo Yardımlı 2/2 Yollu Diyaframlı Vana

    Tip 6213 / ID No. 246310

    Produkt-Foto Typ 6213

    Ürün görseli dizayn özelliklerine göre farklılık gösterebilmektedir.

    • Produkt-Foto Typ 6213
    • Ersatzteil-Zeichnung
    • Ersatzteil-Zeichnung Bürkert
    • Ersatzteil-Zeichnung Bürkert

    2/2-way-solenoid valve, servo coupled

    • Üstten itmeli solenoid sistemi AC19
    • Yay kuplajlı, diferansiyel basınç olmaksızın anahtarlama, maksimum DN 40
    • Pirinç ve paslanmaz çelik gövdeler

    Doğru ürünü seçmek için lütfen teknik dökümanda yer alan teknik bilgileri, görselleri ve notları inceleyiniz.

    Ürün tanımı

    Tip 6213 HP; cebri kuplajlı diyafram sistemine sahip bir 2/2 yollu normalde kapalı solenoid vanadır. (6213 standart versiyon ile Tip 6213 HP yüksek performanslı vana arasındaki fark; yüksek güçte bobin ile kombine olan daha yüksek yay güçleridir.) Vana gazlar ve sıvılar ile diferansiyel basınç olmaksızın 0 bardan itibaren anahtarlama gerçekleştirir.


    GTİP Numaraları
    84818079
    Ülke
    DE

    Teknik özellikler

    İsim
    Değer
    Birim
    Type 6213
    Operation servo-controlled
    Actuator type Plunger valve
    Main valve operating principle Diaphragm valve
    Switch function on/off
    Media separation No
    Valve function A - normally inlet port 1 (P/NC) closed
    Fluidic port connection number 2
    Valve function number of switching positions 2
    Valve function manual actuation No
    Flow Above seat
    Nominal pressure min 0 bar
    Nominal pressure max (liquid) 10 bar
    Pressure Class (PN) PN 10
    Main valve orifice 1 (P) (mm) 20 mm
    Kv value (water) 8.3 m3/h
    Main valve wetted material Stainless steel
    Port connection 1 type Inner thread
    Port connection 1 thread type G
    Port connection 1 thread marking 1
    Port connection 2 type Inner thread
    Port connection 2 thread type G
    Port connection 2 thread marking 1
    Valve seat material Stainless steel
    Medium-contacting part core material Stainless steel
    Medium-contacting part stopper material Stainless steel
    Pilot control material medium-contacting PA (Polyamide)
    Valve body cover material Stainless steel
    Seat seal material EPDM (Ethylene-propylene-diene rubber)
    Sealing toward outside material EPDM (Ethylene-propylene-diene rubber)
    Temperature environment min -30 °C
    Temperature environment max 55 °C
    Temperature medium min -30 °C
    Temperature medium max 100 °C
    Voltage / rated voltage 24 V
    Voltage / rated voltage 24 V
    Voltage tolerance negative 10 %
    Voltage tolerance positive 10 %
    AC voltage No
    DC voltage Yes
    Battery voltage Yes
    Rated power DC 10 W
    Reduced power DC 10 W
    Rated power consumption 10 W
    Electrical connection sort Plug pattern form A according to DIN EN 175301-803
    Electrical connection number of contacts 2 + Grounding conductor
    Cable plug in delivery not included
    Electrical connection position in direction of flow left
    Protection type (IP max. with suitable connector) 65
    Protection type NEMA (max. with suitable connector) 4X
    Coil type placed on top
    Coil insulation material (encasement) Epoxy
    Coil size 40 mm
    Coil wiring overvoltage protection without
    Coil wiring rectifier No
    Coil wiring polarity protection No
    Coil wiring polarity recovery diode No
    Coil special feature for high temperatures
    Thermal insulation class of the actuator H
    Nominal operation/Duty cycle 100 %
    Switch time open min 200 ms
    Switch time open max. 400 ms
    Switch time close min 700 ms
    Switch time close max. 1500 ms
    Valve setting opening time No
    Valve setting closing time No
    Back-pressure-resistant version No
    Vacuum version No
    Analysis version No
    Oil burner valve No
    Steam version No
    Pilot control seal material EPDM (Ethylene-propylene-diene rubber)
    Pilot control centrally bolted Yes
    Low-noise version No
    Core guide Sliding ring
    Main valve with integrated screen No
    Installation length 80 mm
    Without mounting Yes
    Parts free of silicone Yes (according to DIS 1000020797)
    Parts free of oil and grease Yes (according to DIS 1000020797)
    Valve construction Valve complete
    Ağırlık 1,000000 kg
    Ağırlık 1,000000 kg
    Onay tipi ,
    Sertifika tipi
    Tüm tabloyu göster Tabloyu daralt

    İndirilebilir dokumanlar

    Teknik Broşürler

    Tanım
    Dosya büyüklüğü
    Dil / Ülke
    DTS Solenoid Valve, EV Standard 314,1 kB EN / EU
    DTS Standard Valve and NSF 1 MB EN / US
    DTS EV NC General Purpose 258,5 kB ES / ES
    DTS Magnetventil, EV Standard 314 kB DE / DE
    DTS Válvula Solenóide 2/2-vias 460,4 kB PT / BR

    Kullanım kılavuzları

    Tanım
    Dosya büyüklüğü
    Dil / Ülke
    MAN ATEX - Approval 1,5 MB EN,FR,DE / EU
    MAN Additional Information 826,1 kB EN,FR,DE / EU
    MAN Additional Information Ex 131,9 kB EN,FR,DE / EU
    MAN Approval AC19 1,8 MB EN / EU
    MAN Approval EX AC10 1,7 MB EN / EU
    MAN Austauschanleitung 1,1 MB EN,FR,DE / EU
    MAN Information ATEX 2014/34/EU 117,7 kB EN,FR,DE / EU
    MAN Operating Instruct. 6213, 6281 1,1 MB EN / EU
    MAN UL-Version 467,9 kB EN / EU
    MAN Bedienungsanltg. 6213, 6281 1,1 MB DE / DE
    MAN Certification AC19 1,8 MB FR / FR
    MAN Certification EX AC10 1,8 MB FR / FR
    MAN Man. d'utilisation 6213, 6281 1,1 MB FR / FR
    MAN Zulassung AC19 1,8 MB DE / DE
    MAN Zulassung EX AC10 1,7 MB DE / DE

    AB Bildirimi

    Tanım
    Dosya büyüklüğü
    Dil / Ülke
    ABD EU-DoC|EU Declaration 4,9 MB EN,FR,DE

    İnteraktif animasyon

    Tanım
    Dosya büyüklüğü
    Dil / Ülke
    3D_ANIMATION 3D-Animation - 6213 3,2 MB EN
    Kalem
    ID No
    Tanım
    03 164433 Wearing part set DN20 EPDM VA DC