Bürkert - Close to you
Ofis /1
    • Ana ofis
      Burkert Contromatic
      Akiskan Kontrol Sistemleri Ticaret A.S.
      1203/8 Sok. No2-E
      TR-Yenisehir, Izmir
      Telefon Int. (+90 232)459 53 95, Nat. (0232)459 53 95
      Fax Int. (+90 232)459 76 94, Nat. (0232)459 76 94
      E-posta vasbghexrl@ohexreg.pbz
  • Ana ofis
  • Merkez
  • Systemhaus
  • Distribütör
  • Ofis
  • Üretim Merkezi
  • Logistic center
bürkert
We make ideas flow.
We make ideas flow.

    Çarklı Akış Ölçer / Yığın Kontrolörü

    Tip 8025 / ID No. 419520

    Produkt-Foto Typ 8025

    Ürün görseli dizayn özelliklerine göre farklılık gösterebilmektedir.

    • Produkt-Foto Typ 8025
    • Produkt-Foto Typ 8025
    • Ersatzteil-Zeichnung Bürkert

    Insertion flow transmitter

    • DN06 - DN400, PN10 için kompakt veya uzaktan versiyon
    • Akış hızı ve hacim ekranları (iki toplayıcı ile)
    • Otomatik kalibrasyon: TEACH-IN
    • Simülasyon: gerçek akışa ihtiyaç duyulmaksızın temin edilen tüm çıkış sinyalleri

    Doğru ürünü seçmek için lütfen teknik dökümanda yer alan teknik bilgileri, görselleri ve notları inceleyiniz.

    Ürün tanımı

    Akış transmitteri; nötr, düşük agresiflikli, katı parçacıksız sıvılarda kullanım için özel olarak tasarlanmıştır. Cihazın farklı modelleri mevcuttur: Çarklı sensör ile kompakt transmitter (standart çıkış sinyalli veya batarya tahrikli indikatör versiyonu) veya herhangi bir akış sensörüne bağlantı için ve panel veya duvara montaj için uzaktan üniversal transmitter. Bu transmitter tarafından açık kolektör çıkışlı sensörler, röle çıkışlı, TTL, CMOS veya bobin sensörler çalıştırılabilmektedir.


    GTİP Numaraları
    90261021
    Ülke
    FR

    Teknik özellikler

    İsim
    Değer
    Birim
    Type 8025
    Flow rate (volume) No
    Continuous measurement Yes
    Dosing Yes
    Switch No
    Construction device Compact
    Display type Display
    Protection class measurement device (IP) 65
    DC voltage min. 12 V
    DC voltage max. 36 V
    Battery voltage No
    Precision of volume flow rate in relation to reading 1 %
    Temperature environment min -10 °C
    Temperature environment max 60 °C
    Temperature medium min -15 °C
    Temperature medium max 80 °C
    Pressure Class (PN) PN 10
    Dynamic viscosity min. 0 cP
    Dynamic viscosity max. 300 cP
    Detection of flow direction No
    Transmitter type Basic
    Sensor type Paddle wheel
    Paddle wheel type Magnetic
    Paddle wheel measuring principle detection Hall
    Fitting electronic interface Insertion 2 (inch)
    Electrical connection 1 type Cable gland M20
    Electrical connection 1 quantity 2 PCE
    Electrical connection 1 gender Terminal block
    Electrical connection 1 material category Plastics
    Electrical connection 1 material PA (Polyamide)
    Electrical connection 1 seal material Neoprene
    Input type digital quantity 4 PCE
    Output 1 digital type Transistor
    Output 1 digital transistor connection NPN Yes
    Output 1 digital transistor connection PNP Yes
    Digital output 1 transistor contactless 0.1 A
    Output 2 digital type Relay
    Output 2 digital version NC No
    Output 2 digital version NO Yes
    Output 2 digital relay/reed voltage AC 230 V
    Output 2 digital relay/reed voltage DC 40 V
    Output 2 digital relay/reed power AC 3 A
    Output 2 digital relay/reed power DC 3 A
    Output 3 digital type Relay
    Output 3 digital version NC No
    Output 3 digital version NO Yes
    Output 3 digital relay/reed voltage AC 230 V
    Output 3 digital relay/reed voltage DC 40 V
    Output 3 digital relay/reed power AC 3 A
    Output 3 digital relay/reed power DC 3 A
    Output 4 digital type Transistor
    Output 4 digital transistor connection NPN Yes
    Output 4 digital transistor connection PNP Yes
    Output 4 digital transistor current 0.1 A
    Electronics body material PC (Polycarbonate)
    Cover material PC (Polycarbonate)
    Protection lid material PC (Polycarbonate)
    Nut material PC (Polycarbonate)
    Seal sensor/housing material FKM (Fluor rubber)
    Seal housing/cover material NBR
    Protection lid seal material Silicone
    Screw material Stainless steel
    Fastening part material PSU (Polysulfone) / PPSU (Polyphenylsulfone)
    Parametrisation local Yes
    Parametrisation separate No
    Parametrisation fixed No
    Finger material composition Plastics
    Finger material PVDF (Polyvinylidene fluoride)
    Medium-contacting parts seal material FKM (Fluor rubber)
    Paddle wheel material PVDF (Polyvinylidene fluoride)
    Paddle wheel axle material Ceramic
    Bearing material Ceramic
    Insertion sensor length short
    Tropical climate version Yes
    Time dosing No
    Batch dosing Yes
    Extended diagnosis No
    Volumeter Yes
    Ağırlık 0,880000 kg
    Ağırlık 0,880000 kg
    Tüm tabloyu göster Collapse table

    İndirilebilir dokumanlar

    Tanım
    Dosya adı
    Dosya büyüklüğü
    Dil / Ülke
    ABD EU-DoC|EU Declaration 1000292039-0_8025_EU-DoC signed.pdf 492,2 kB ML
    DTS Dosiergerät DS8025-Batch-DE-DE.pdf 1,1 MB DE / DE
    DTS Batch controller DS8025-Batch-EU-EN.pdf 1,1 MB EN / EU
    DTS Contrôleur de dosage num DS8025-Batch-FR-FR.pdf 1,1 MB FR / FR
    DTS Transmissor de Vazão DS8025-Standard-BR-PT.pdf 743,3 kB PT / BR
    DTS Control Panel DS8025-Standard-GB-EN.PDF 96,9 kB EN / GB
    DTS Durchfluss-Transmitter DS8025-Transmitter-DE-DE.pdf 1,5 MB DE / DE
    DTS Transmisor de caudal DS8025-Transmitter-ES-ES.pdf 837,2 kB ES / ES
    DTS Flow-Transmitter DS8025-Transmitter-EU-EN.pdf 1,5 MB EN / EU
    DTS Transmetteur à INSERTION DS8025-Transmitter-FR-FR.pdf 1,5 MB FR / FR
    DTS Flow-Transmitter DS8025-Transmitter-US-EN.pdf 956,3 kB EN / US
    DTS Dosificador de caudal DS8025-batch-ES-ES.pdf 1,7 MB ES / ES
    DTS Fitting für Insertion-Sensor DSS020-Standard-DE-DE.pdf 400,7 kB DE / DE
    DTS Fitting de insercion DSS020-Standard-ES-ES.pdf 887,4 kB ES / ES
    DTS Fitting for insertion Sensor DSS020-Standard-EU-EN.pdf 402,9 kB EN / EU
    DTS Raccord à insertion DSS020-Standard-FR-FR.pdf 400,2 kB FR / FR
    MAN 8035 Battery Flowmeter MA8025-BATTERY-EU-ML.pdf 1,4 MB EN,FR,DE / EU
    MAN MAN_8025_8035_SE35_BATCH MA8025-MAN-BATCH-EU-DE.pdf 5,4 MB DE / EU
    MAN MAN_8025_8035_SE35_BATCH MA8025-MAN-BATCH-EU-EN.pdf 5,5 MB EN / EU
    MAN MAN_8025_8035_SE35_BATCH MA8025-MAN-BATCH-EU-FR.pdf 5,6 MB FR / EU
    MAN BA 8025-8035-SE35 Standard MA8025-MAStandard-EU-DE.pdf 4,7 MB DE / EU
    MAN Manual 8025-8035-SE35 standard MA8025-MAStandard-EU-EN.pdf 4,7 MB EN / EU
    MAN Manuel 8025-8035-SE35 standard MA8025-MAStandard-EU-FR.pdf 4,7 MB FR / EU
    MAN QS_8025_8035_SE35_BATCH MA8025-QS-BATCH-EU-DE.pdf 3 MB DE / EU
    MAN QS_8025_8035_SE35_BATCH MA8025-QS-BATCH-EU-EN.pdf 2,9 MB EN / EU
    MAN QS_8025_8035_SE35_BATCH MA8025-QS-BATCH-EU-FR.pdf 3,1 MB FR / EU
    MAN UNIVERSAL Flow Transmitter MA8025-QS_UNIVERSAL-EU-ML.pdf 1,8 MB EN,FR,DE / EU
    MAN QS standard 8025-8035-SE35 MA8025-QSstandard-EU-DE.pdf 3,2 MB DE / EU
    MAN QS standard 8025-8035-SE35 MA8025-QSstandard-EU-EN.pdf 3,1 MB EN / EU
    MAN QS standard 8025-8035-SE35 MA8025-QSstandard-EU-FR.pdf 3,2 MB FR / EU
    MAN Replacement instructions MA8025-Replacement-EU-ML.pdf 319 kB EN,FR,DE / EU
    MAN Manual de Instrucciones MA8025-Standard-ES-ES.pdf 923,1 kB ES / ES
    MAN UNIVERSAL Transmitter MA8025-UNIVERSAL-EU-DE.pdf 1 MB DE / EU
    MAN UNIVERSAL Flow Transmitter MA8025-UNIVERSAL-EU-EN.pdf 1,8 MB EN / EU
    MAN Transmetteur débit UNIVERSAL MA8025-UNIVERSAL-EU-FR.pdf 1 MB FR / EU
    MAN Universal MA8025-Universal-ES-ES.pdf 648,8 kB ES / ES
    MAN Fitting for insertion devices MAS020-Fitting-EU-ML.pdf 1,5 MB EN,FR,DE / EU
    Kalem
    ID No
    Tanım
    01 553189 Cover PC + window+ screws
    02 553192 Spare part 8 foils flow with relay
    03 553171 PCB FLOW BESTÜCKT BATCH
    06 449755 Cable connector M20 x 1,5 black
    07 551775 1 EPDM gasket, 1 Stopper, 1 cable gasket
    08 418316 To flow sensor resound, short ones imp.
    09 425526 Body 8025 PC 2M20+earth